Celcius CTW forum

forum for everything CTW


You are not connected. Please login or register

ECU for MX2

View previous topic View next topic Go down  Message [Page 1 of 1]

1 ECU for MX2 on Tue May 29, 2012 6:07 am

thekiller


Private
Private
Hello.
The CTW ECU Full and Burst are avaliable for sell, now what is the best buy:
Etiny advanced mini mosfet + burst/auto ECU for Celcius CTW
OR
Dynamic Ecu (Full Auto & Burst) CTW MX3

Thaks

View user profile

2 Re: ECU for MX2 on Tue May 29, 2012 8:14 am

I'd better stays with ETiny, as MX3 is not yet field tested for a reasonable time.

View user profile

3 Re: ECU for MX2 on Wed May 30, 2012 10:45 am

Sunray


Major
Major
I agree - I have seen the new CTW one at JD, but they havent installed it in a players gun (although they have tested it in a weapon on the range and it does work).

JD are getting some E-Tiny ones in (about 2 weeks away) so hang on (got one on order hence why I know).

cheers

View user profile

4 Re: ECU for MX2 on Wed May 30, 2012 11:22 am

MrCK

avatar
Admin
Admin
Mmm, seconded to wait for JD and the etiny Smile

View user profile http://forums.zeroin.co.uk

5 Re: ECU for MX2 on Wed May 30, 2012 11:48 am

I've ordered ETiny from www.powair6.com - got it in a week or so.

View user profile

6 Re: ECU for MX2 on Thu May 31, 2012 4:00 am

ArthurDent


Private
Private
Hi,

ive got the Etiny EL001 and EL003.

they work without problemes.
the EL003 is realy "tiny"

You can adjust bust/FA and the blue LED insentity via
trigger.

this setup works perfect for me.


View user profile

7 Re: ECU for MX2 on Thu May 31, 2012 7:22 am

twingear

avatar
Private
Private
Got Dynamic ECU yesterday cheers It's actually black, looks great in my CTW. The new sensor is very nice. I prefer to use the original ECU, coz I'm planing to buy the MX3 mosfet unit.


View user profile

8 Re: ECU for MX2 on Thu May 31, 2012 8:06 am

ArthurDent


Private
Private
nice .. they use the same LEDs that i use as a sparepart for
a damaged one ..


View user profile

9 Re: ECU for MX2 on Thu May 31, 2012 9:16 am

Twingear, does this new ECU fixes overspin?

View user profile

10 Re: ECU for MX2 on Thu May 31, 2012 9:47 am

Joe90

avatar
Sargeant
Sargeant
How much is the mx3 ecu compared to the 60 odd quid for the etiny?

View user profile

11 Re: ECU for MX2 on Thu May 31, 2012 10:01 am

twingear

avatar
Private
Private
Spike Viper, I had over spin only when I use 11.1v 2400mAh, not with 11.1 1200mAh. My PTW does the same with 11.1v 2400mAh.

View user profile

12 Re: ECU for MX2 on Thu May 31, 2012 10:06 am

twingear

avatar
Private
Private
Joe90 wrote:How much is the mx3 ecu compared to the 60 odd quid for the etiny?

About the same..

View user profile

13 Re: ECU for MX2 on Thu May 31, 2012 10:46 am

twingear wrote:Spike Viper, I had over spin only when I use 11.1v 2400mAh, not with 11.1 1200mAh. My PTW does the same with 11.1v 2400mAh.
Hmmm. Than I'm lucky. I've got overspin on 11.1 1200mah 20C battery on both CTWs.

View user profile

14 Re: ECU for MX2 on Thu May 31, 2012 1:19 pm

Joe90

avatar
Sargeant
Sargeant
Me too, got a new set of brushes on the way so it may have been that though

View user profile

15 Re: ECU for MX2 on Thu May 31, 2012 7:11 pm

thekiller


Private
Private
What the diferences you see about the new ECU and yhe old one?
More ROOF?

View user profile

16 Re: ECU for MX2 on Fri Jun 01, 2012 4:52 am

Sunray


Major
Major
The ECU does not control the rate of fire, it is just the sensor which tells the MOSFET board to go and stop.

The new CTW ECU is supposed to be more sensitive and allows a greater degree of flexibility of adjusting the light level on the LED.

It also apparantly a system which will indicate if you have pulled the trigger for more than 3 seconds which will invalidate the warranty as supplied in the UK by STTS..... big brother is watching us lads!!!!

The new CTW MOSFET gives a ROF of 29 BB's a second apparently - so with my maths, a 3 second burst and your mags empty anyway......

BRING THE NOISE

cheers

View user profile

17 Re: ECU for MX2 on Fri Jun 01, 2012 5:14 am

MrCK

avatar
Admin
Admin
Sunray wrote:It also apparantly a system which will indicate if you have pulled the trigger for more than 3 seconds which will invalidate the warranty as supplied in the UK by STTS..... big brother is watching us lads!!!!

lolwut? Thats crazy...

View user profile http://forums.zeroin.co.uk

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum