Celcius CTW forum

forum for everything CTW


You are not connected. Please login or register

Internal problems

Go down  Message [Page 1 of 1]

1 Internal problems on Thu Mar 22, 2012 2:29 pm

nativexam


Recruit
Recruit
Ok, I am almost positive that I have blown the fuse in my MX2. I plug in my Lipo and I get absolutely nothing, no light, to turn of the motor, and no response at all. So I have this question, where is the fuse in the CTW and how do I get to it?



Last edited by nativexam on Sat Mar 24, 2012 5:55 pm; edited 1 time in total

View user profile

2 Re: Internal problems on Thu Mar 22, 2012 5:51 pm

gycu


Sargeant
Sargeant
Hey,

The fuse is in the buffer tube. Brake the gun in half, then take out the round cap from the buffer tube (the one with the hole in it) and you will see it - it should be green, use a pliers to take it out.

View user profile

3 Internal problems on Sat Mar 24, 2012 5:55 pm

nativexam


Recruit
Recruit
Thanks! I replaced the fuse, but now I am having some more problems. The blue light turns on and works perfectly with a mag and such, but the motor will not turn over. Before this I was blowing fuses the second I pulled the trigger with the gun put together. I am thinking the problem is lying with the motor since it seems like the ECU and such is working fine.

::EDIT::

Ok I took off the pistol grip in order to check out the connectors and connection in general. To me everything seems fine, the wires are soldered solidly. Though when I move around the wires running down the back of the motor and pull the trigger I can get it to spin and turn the gears at random.

::EDITx2::

Ok I think I may have narrowed down the problem. To me it looks as if the Brushes are shot, from comparing the ones on the motor to brand new ones.

View user profile

Sponsored content


Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum